TOTALINE P374-2900 - Page 67

Page 13.5
Adjusting the DeadbandAdjusting the Deadband
Adjust the deadband
for the 1st stage.
(1 - 6 )
2
Setup
24
Adjust the deadband
for the 2nd stage.
(0 - 10 )
2
Setup
25
Adjust the deadband
for the 3rd stage.
(0 - 10 )
2
Setup
26
For more detailed information, please see the explanation on the
previous page.
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
PROGRAM
Press
MODE
Press
MODE
Press
PROGRAM
MODE
MODE
Press the MODE button. While holding
the MODE, press the PROGRAM
button to enter Setup screens.
Press the MODE button repeatedly
until this setup screen appears.
TOTALINE
Note: Press the MODE
button momentarily
to move through the
setup screens. Press
and hold the MODE
button to move back-
wards through the
setup screens.
13