VISIT WWW.TOTALPOND.COM FOR INFORMATION AND TIPS.
EN
8
MAINTENANCE
• The Color Changing Light Set may require cleaning from
time to time for optimal performance.
• Before cleaning, always disconnect from the power
source.
• Use a soft cloth or brush and warm water to clean parts.
• Reconnecting to the power source when you are
finished.
LIGHT PERFORMANCE
TROUBLESHOOTING
• Check to make sure you have turned on the lights
using the remote.
• Check to make sure the plastic tab has been removed
from the remote.
• The control box will time-out during periods of
inactivity. If your selection is not being read, simply
press the “strobe” and “fade” buttons simultaneously
before making your next section.
• Make sure to replace the 1 CR2025 battery every 6
months.
• Make sure the remote is within range of the control
box.
• If lights fail to illuminate, check that lights are getting
power by testing another appliance in the same power
outlet.
Power Consumption
Power: 2.5 watts per light
Voltage: 12 volts
Cord length
0.5 ft. to the control box
12 ft. cord from control box to
first light
4 ft. cord between lights
To Next Page
Loading...