Need help?Do you have a question about the Totem Dog and is the answer not in the manual?
Guide on properly inserting nuts into beams for secure assembly.
Tips for handling manufacturing issues with nuts and using extra parts.
Method for pushing nylon standoffs with thumb and wrench.
Instructions on using the beam/bolt ruler to measure components.
Connecting beams and nuts to form the foundational structure.
Securing the DC motor bracket to the chassis.
Attaching the motor hubs to the DC motor.
Connecting the wheels to the motor hubs.
Connecting beams and brackets to form the leg structures.
Connecting the assembled legs to the main body.
Attaching strip brackets and spacers to the main body.
Attaching triangular boards to form the front head section.
Securing a triangular board to the structure with bolt and nut.
Attaching triangular boards for facial features.
Attaching a 90-degree bracket for head support.
Joining head components to the main body using brackets.
Fastening head parts with bolts.
Connecting the motor to the battery switch.
Gluing googly eyes onto the dog's head.
Loosening or tightening lock nuts for motor function or leg stability.
Confirmation that the puppy robot is ready to play.
Precautions for safe handling, usage, and environmental conditions.
Details on required batteries, insertion, and avoiding leakage.
To Next Page
General