What to do if TOUGHBUILT TB-H2-LM-165-BT shows Error Code ERR06?
If your TOUGHBUILT Measuring Instruments device shows 'ERR06', it means the battery is low. Replace the batteries with fresh ones.
How to fix TOUGHBUILT TB-H2-LM-165-BT Measuring Instruments with no laser beam?
If your TOUGHBUILT Measuring Instruments device has no laser beam, check the following: * Ensure that 2 x AAA alkaline batteries are correctly installed. * Replace depleted batteries with fresh ones. * Verify that the batteries are installed with the correct polarity. * Clean any corrosion from the battery terminals. * Press the ON button more firmly; if it still doesn't work, the unit may need repair. * Refer to the error-messages section.
What to do if TOUGHBUILT TB-H2-LM-165-BT shows Error Code ERR03?
If your TOUGHBUILT Measuring Instruments device displays 'ERR03', it indicates that the distance you're trying to measure is beyond the device's measuring range. Ensure you are measuring within the specified effective range.
What to do if TOUGHBUILT TB-H2-LM-165-BT shows Error Code ERR01?
If your TOUGHBUILT Measuring Instruments device shows 'ERR01', it means the reflected laser signal is too weak. Try changing the target surface or attaching a piece of white paper to the target to improve reflection.
General| Brand | TOUGHBUILT |
|---|---|
| Model | TB-H2-LM-165-BT |
| Category | Measuring Instruments |
| Language | English |
To Next Page