Need help?Do you have a question about the Tourmaster Synergy 2.0 and is the answer not in the manual?
General| Brand | Tourmaster |
|---|---|
| Model | Synergy 2.0 |
| Category | Motorcycle Accessories |
| Language | English |
Describes Synergy 2.0 apparel features like steel fiber heating elements and temperature sensors for comfort and safety.
Details the 12-volt power requirement and critical warnings about incompatible power sources.
Emphasizes following step-by-step instructions and consulting the vehicle's owner's manual for safe installation.
Provides detailed instructions for disconnecting and reconnecting vehicle battery terminals to the harness.
Guides on routing the harness away from damage and securing it to the vehicle frame.
Introduces the process of connecting Synergy apparel, like jacket or vest liners, to the power lead.
Step-by-step instructions for wiring Synergy jacket or vest liners using a single controller.
Explains how to connect Synergy jacket or vest liners using a dual controller.
Provides instructions for connecting Synergy pant and chap liners to the power lead and controller.
Step-by-step guide for connecting Synergy gloves to the power lead and single controller.
Instructions for connecting heated insoles to the Synergy power lead harness.
Details on how to connect heated insoles to Synergy pant liners.
Steps for connecting heated insoles to Synergy jacket/vest using a dual controller.
Procedure for connecting Synergy jacket or vest to a dual controller.
Explains how to connect Synergy gloves when using heated insoles.
Steps for connecting heated insoles to the Synergy glove setup.
Detailed steps for connecting Synergy jacket or vest liners to Synergy pants.
Caution against using the Synergy Single Controller when connecting jacket with chaps or full pant liner.
Instructions for connecting Synergy jacket liners to Synergy gloves.
Instructions for connecting Synergy vest liners to Synergy gloves.
Procedure for connecting the Synergy vest to the power source.
Steps for connecting Synergy gloves to pant liners using dual controller.
Instructions for connecting Synergy pants for single or dual controller setups.
Notice that the vehicle's engine must be running to operate Synergy apparel safely.
Explains how to operate the temperature control knob for adjusting garment warmth.
Discusses how fit, layering, and vehicle electrical system affect apparel performance.
Addresses potential issues with low vehicle power output and CANBUS systems.
Chart detailing power requirements (Watts, Amps) for each Synergy garment at different temperature levels.
Guidance on identifying and fixing loose electrical connections for optimal heat.
Instructions on locating, inspecting, and replacing the fuse in the power lead wiring harness.
Information on troubleshooting damaged heating elements or temperature controls.
Step-by-step instructions for machine washing Synergy electrically heated apparel.
Recommended steps for storing Synergy apparel in its pouch to ensure longevity.
Details the 3-year warranty for temperature control, heating elements, and connectors.
Information on how to contact a local authorized dealer for warranty service.
To Next Page