TOV BEATRIX - Step 3: Connect Foot Rest; Step 4: Final Tightening and Adjustment

Step 2
STEP 444444
STEP 444444
B
B
C C
D
A
3
Insert the 4 pcs of Screws (H) into the holes to connect the foot rest. Use
Wrench (I) to tighten the Screws (H) clockwise,do not fully tighten until
the last step.
I
4
Turn over the barstool/Counterstool and adjust the angle of the legs until
they are even.
Fully tighten the Screws(H).
Fully tighten Screws(G) at last.
Assembly is completed.
E H