EasyManua.ls Logo

Toyota 1996 Avalon - Page 78

Toyota 1996 Avalon
202 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in the
desired station (see “TUNE/SEEK” or
“TUNE”). Push and hold down the button
until you hear a beep—this will set the sta-
tion to the button. The button number will
appear on the display.
To tune in to a preset station: Push the
button for the station you want. The button
number and station frequency will appear
on the display.
Types 1-1 and 1-2—These systems can
store one AM and one FM station for each
button. The preset station memory will be
canceled out if the power source is inter-
rupted (battery disconnected or fuse
blown).
Type 1-3—This system can store one AM
and two FM stations for each button. (The
display will show “AM”, “FM1”, or “FM2”
when you push “AM
.
FM”.) To cancel out
the preset station memory, push “1”, “2”,
and “3” at the same time and hold them in
until you hear a beep.
(Eject button)
Types 1-2 and 1-3
Push this button to eject a cassette.
After you turn the ignition to “LOCK”, you
will be able to eject a cassette but you will
not be able to reinsert it.
AM
.
FM
Push “AM
.
FM” to switch between the AM
and FM bands.
Types 1-1 and 1-2—”AM” or “FM” will ap-
pear on the display.
Type 1-3—“AM” or “FM1”, or “FM2” will
appear on the display. These systems al-
low you to set twelve FM stations, two for
each button.
If the audio system is off, you can turn on
the radio by pushing “AM
.
FM”. Also, push
“AM
.
FM” to switch from cassette opera-
tion to radio operation.
APS (Automatic program selection)
Type 1-3 only
The automatic program selection (APS)
feature allows you to program your cas-
sette player to skip forward or backward
to locate the song you want to hear. You
can skip up to nine tracks at a time.
Push “APS”. “APS” AND “1” will appear on
the display.
Next, push “APS” until the number on the
display reaches the number of tracks you
want to skip. If you push “APS” ten times,
the APS feature will be turned off.
If you choose the number “1”, the play-
er will rewind to the beginning of the
current track.
When counting the number of tracks
you want to rewind, remember to
count the current track as well. For ex-
ample, if you want to rewind to a song
that is two before the song you are lis-
tening to, push “APS” until “3” appears
on the display.

Table of Contents

Related product manuals