149
2000 4Runner (OM35762U)
Ventilation
For best results, set controls to:
—For automatic operation
Press in the “AUTO” button.
Temperature—Towards COLD
(to the left)
Air conditioning—OFF
—For manual operation
Fan speed—To the desired fan speed
Temperature—Towards COLD
(to the left)
Air intake—FRESH (outside air)
Air flow—PANEL
Air conditioning—OFF
Defogging and defrosting
The inside of the windshield
For best results, set controls to:
—For automatic operation
Temperature—Towards WARM
(to the right) to heat;
COLD (to the left)
to cool
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
—For manual operation
Fan speed—To the desired fan speed
Temperature—Towards WARM
(to the right) to heat;
COLD (to the left)
to cool
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Pressing the windshield button turns on
the defroster- linked air conditioning and
the FRESH mode is automatically set.
This setting clears the front view more
quickly.
At this time, the “A/C” button indicator
comes on regardless of whether the “A/C”
button is pressed in or not.
If you want to return the setting to RE-
CIRCULATE mode, press the air intake
selector button once again.
When the “A/C” button is not pressed in,
pressing another air flow button turns off
the air conditioning.
To turn off the air conditioning alone,
press the “A/C” button once again.
On humid days, do not blow cold air
on the windshield—the difference be-
tween the outside and inside tempera-
tures could make the fogging worse.
To Next Page
