’00camry U
58
1. Remove the head restraint and upper
pad by pressing the head restraint
lock release button and pulling up
the head restraint and upper pad.
Lower the child seat cushion.
2. Insert the head restraint and upper
pad into the storage bag. Then place
the storage bag into the trunk by
attaching with Velcro.
CAUTION
Do not use the built−in child restraint
with the head restraint and upper pad
installed. When using the built−in
child restraint, the head restraint and
upper pad should be stored in the
trunk.
3. While pulling the seat belt release
strap (black), pull both shoulder
belts together.
Pull the seat belt release strap from
above at about 45
a ngle to the child seat
cushion.
If the shoulder belts cannot be pulled out,
return the child seat cushion to an almost
closed position, firmly pull the seat belt
release strap and at the same time pull
both shoulder belts, then lower the child
seat cushion again.
To Next Page
Loading...
