’00camry U
72
Anchor brackets
Use the anchor bracket on the package
tray behind the rear seat to attach the top
strap.
TO USE THE ANCHOR BRACKET:
1. Outside anchor brackets only—
Remove the head restraint.
2. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see ”Child restraint” in this
section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
To Next Page
Loading...
