Toyota 2001-2004 Corolla - REPLACEMENT

140OH–01
A65077
A60622
A01045
A64005
14–82
–ENGINE MECHANICAL CHAIN SUB–ASSY
1092
2004 COROLLA (RM1037U)
REPLACEMENT
1. REMOVE ENGINE UNDER COVER RH
2. DRAIN COOLANT (See page
16–7)
3. REMOVE FRONT WHEEL RH
4. REMOVE CYLINDER HEAD COVER NO.2
(a) Remove the 2 nuts, 2 clips and cylinder head cover.
5. REMOVE FAN AND GENERATOR V BELT
(a) Turn the V–ribbed belt tensioner slowly clockwise and
loosen it. Then, remove the fan and generator V belt and
put back the V–ribbed belt tensioner little by little and fix
it quietly.
6. SEPARATE VANE PUMP ASSY (See page
51–8)
NOTICE:
Do not disconnect the hose.
7. REMOVE GENERATOR ASSY (See page 19–16)
8. REMOVE ENGINE MOUNTING INSULATOR
SUB–ASSY RH
(a) Remove the PS oil pump reservoir and put it aside.
(b) Place a wooden block between the jack and engine, and
set the jack, then remove the 4 bolts, the 2 nuts and en-
gine mounting insulator RH.