Toyota 2001-2004 Corolla - Page 24

A12816
B00086
A62178
Push
A10076
–ENGINE MECHANICAL CHAIN SUB–ASSY
14–85
2004 COROLLA (RM1037U)
17. REMOVE WATER PUMP ASSY (See page
16–8)
18. REMOVE TRANSVERSE ENGINE ENGINE
MOUNTING BRACKET
(a) Remove the 3 bolts and transverse engine engine mount-
ing bracket.
19. REMOVE CRANK POSITION SENSOR
(a) Remove the 2 bolts installing the crank position sensor.
20. REMOVE CHAIN TENSIONER ASSY NO.1
(a) Remove the 2 nuts and chain tensioner.
NOTICE:
Be sure not to revolve the crankshaft without the chain ten-
sioner.
21. REMOVE TIMING CHAIN OR BELT COVER
SUB–ASSY
(a) Remove the 11 bolts and nuts.
(b) Using a torx wrench socket (E8), remove the stud bolt.
(c) Remove the timing chain cover by prying the portions be-
tween the cylinder head and cylinder block with a screw-
driver.
NOTICE:
Be careful no tot damage the contact surfaces of the timing
chain cover, cylinder head and cylinder block.