A01045
A64005
A64021
A64022
–ENGINE MECHANICAL CYLINDER HEAD GASKET
14–113
2004 COROLLA (RM1037U)
16. SEPARATE VANE PUMP ASSY (See page
51–8)
NOTICE:
Do not disconnect the hose.
17. REMOVE GENERATOR ASSY (See page
19–16)
18. SEPARATE EXHAUST PIPE ASSY FRONT
(a) Remove the 2 bolts, 2 compression spring installing the front side of exhaust pipe.
(b) Remove the gasket.
19. REMOVE ENGINE MOUNTING INSULATOR
SUB–ASSY RH
(a) Remove the PS oil pump reservoir and put it aside.
(b) Place a wooden block between the jack and engine, and
set the jack, then remove the 4 bolts, the 2 nuts and en-
gine mounting insulator RH.
20. DISCONNECT ENGINE WIRE
(a) Remove the 5 clamps from the 5 clamp brackets.
(b) Disconnect the 4 ignition coil connectors.
(c) Remove the bolt and nut installing the engine wire.
To Next Page
Loading...
