Toyota 2001 Sequoia - Page 187

01_SEQUOIA_U (L/O 0009)
181
2001 SEQUOIA (OM34414U)
“AUTO” button
For automatic operation of the rear air
conditioning, press the “AUTO” button. An
indicator light will illuminate to show that
the automatic operation mode has been
selected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed and air flow according to the tem-
perature.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, press
the “OFF” button.
Fan speed selector
Select the mode button you desire to ad-
just the fan speed and push it.
In automatic operation, the fan speed is
adjusted automatically unless you desire
another fan speed mode.
Temperature selector
To increase the temperature, press the
“!” side, to decrease it, press the “"”
side.
The temperature display changes between
“!C” and “!F” when the unit of the outside
temperature display is changed. (For de-
tails, see “Multi−information display” on
page 184 in Section 1−9.)
“REAR” Button
You can turn on or off the rear air condi-
tioning system by pushing the button.
“FRT + RR” button
You can cancel the operations from the
rear control panel by pushing this button.
While the operation from the rear control
panel are stopped, the front and rear air
conditioning systems can be set simulta-
neously from the front control panel.
“OFF” button
Push the “OFF” button to turn off the air
conditioning system.
Air flow selector
Push the button to select the vents used
for air flow.
1. Floor—Air flows mainly from the floor
vents.
2. Bi−level—Air flows from both the roof
panel vents and floor vents.
3. Panel—Air flows mainly from the roof
panel vents.