’02 4Runner_U (L/O 0108)
76
2002 MY 4RUNNER_U (OM35787U)
TO USE OUTSIDE ANCHOR BRACKET:
1. Remove the head restraint.
2. Open the anchor bracket cover with
the symbol mark shown in the il-
lustration.
3. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see “Child restraint” in this
section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
To Next Page
Loading...
