61057–01
B60047
B56642
Clip
61–14
–SEAT BELT REAR SEAT BELT (TMC MADE)
2464Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REAR SEAT BELT (TMC MADE)
REPLACEMENT
1. REMOVE REAR SEAT CUSHION ASSY (See page 72–34)
2. REMOVE ROOF SIDE GARNISH INNER RH
(See page 76–20)
3. REMOVE ROOF SIDE GARNISH INNER LH
(See page 76–20)
4. REMOVE CENTER STOP LAMP ASSY
(See page 65–16)
5. REMOVE REAR SEAT SHOULDER BELT COVER RH
(a) Using a screwdriver, disengage the claws in the front side.
HINT:
Tape the screwdriver tip before use.
(b) Pull out the shoulder belt cover to the front side to disen-
gage the claws.
(c) Pull out the shoulder belt from the slit to remove the shoul-
der belt cover.
6. REMOVE REAR SIDE SEAT BACK ASSY RH
(See page 72–33)
7. REMOVE REAR SIDE SEAT BACK ASSY LH
(See page 72–33)
8. REMOVE PACKAGE TRAY TRIM PANEL ASSY
(a) Remove the 3 bolts and the floor anchor of the seat belt.
(b) Disengage the clips and claws and pull out the belt to re-
move the package tray trim.
To Next Page
Loading...
