B32909
Reclining Switch
Slide Switch
Rear Vertical Slide Switch
Front Vertical Slide Switch
Front Power Seat Switch
12
B35140
B57292
ClockwiseCounter–
Driving Axis
clockwise
72–4
–SEAT FRONT POWER SEAT CONTROL SYSTEM
2593Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
2. INSPECT FRONT POWER SEAT SWITCH RH
(a) Inspect the front power seat switch continuity.
Standard (Slide switch):
Terminal No. Switch position Specified condition
1 ⇔ 9
4 ⇔ 6
FRONT Continuity
6 ⇔ 4 ⇔ 9 OFF Continuity
4 ⇔ 9
1 ⇔ 6
REAR Continuity
Standard (Front vertical switch):
Terminal No. Switch position Specified condition
1 ⇔ 5
4 ⇔ 10
UP Continuity
5 ⇔ 4 ⇔ 10 OFF Continuity
1 ⇔ 10
4 ⇔ 5
DOWN Continuity
Standard (Rear vertical switch):
Terminal No. Switch position Specified condition
1 ⇔ 8
4 ⇔ 7
FRONT Continuity
7 ⇔ 4 ⇔ 8 OFF Continuity
1 ⇔ 7
4 ⇔ 8
REAR Continuity
Standard (Reclining switch):
Terminal No. Switch position Specified condition
1 ⇔ 3
2 ⇔ 4
FRONT Continuity
2 ⇔ 4 ⇔ 3 OFF Continuity
1 ⇔ 2
3 ⇔ 4
REAR Continuity
If the result is not as specified, replace the front power seat
switch.
3. INSPECT FRONT UP, DOWN POWER SEAT MOTOR
ASSY
(a) Inspect the front up, down power seat motor operation.
(1) Check that the motor rotates smoothly when the
battery is connected to the connector terminal.
Standard:
Terminal No. Specified Condition
Battery positive voltage ⇔ 1
Battery negative voltage ⇔ 2
Counterclockwise
Battery positive voltage ⇔ 2
Battery negative voltage ⇔ 1
Clockwise
If the result is not as specified, replace the front up, down power
seat motor.