72–36
–SEAT REAR SEAT (TMC Made)
2625Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
19. INSTALL SEPARATE TYPE REAR SEAT BACK COVER
RH
(a) Using hog ring pliers, install the hog rings.
NOTICE:
Be careful not to damage the cover.
When installing the hog rings,take care to prevent wrinkles as little as possible.
(b) Using hog ring pliers, install new hog rings.
20. INSTALL REAR SEAT BACK HINGE SUB–ASSY CENTER
(a) Install the rear seat back hinges center with the 2 bolts.
Torque: 18 N⋅m (183 kgf⋅cm, 13 ft⋅lbf)
21. INSTALL REAR SEAT BACK HINGE SUB–ASSY RH
(a) Install the 2 rear seat back hinge with the 2 bolts.
Torque: 18 N⋅m (183 kgf⋅cm, 13 ft⋅lbf)
22. INSTALL REAR SIDE SEAT BACK ASSY LH
Torque: 18 N⋅m (183 kgf⋅cm, 13 ft⋅lbf)
23. INSTALL REAR SIDE SEAT BACK ASSY RH
(a) Install the rear side seat back assembly with the 2 bolts.
Torque: 18 N⋅m (183 kgf⋅cm, 13 ft⋅lbf)
24. INSTALL REAR SEAT BACK ASSY RH
(a) Install the rear seat back assembly with the 2 bolts.
Torque: 18 N⋅m (183 kgf⋅cm, 13 ft⋅lbf)
25. INSTALL REAR SEAT BACK ASSY LH
Torque: 18 N⋅m (183 kgf⋅cm, 13 ft⋅lbf)
To Next Page
Loading...
