74043–04
B56782
B56783
Nut Position
Bolt Position
–SLIDING ROOF/CONVERTIBLE SLIDING ROOF (TMMK Made)
74–9
2673Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REPLACEMENT
HINT:
Installation is in the reverse order of removal. But the installation is indicated only when it has a point.
1. REMOVE SLIDING ROOF GLASS SUB–ASSY
(a) Disengage the claws and turn the sliding roof side garnish
as shown in the illustration.
(b) Using a torx wrench (T25), remove the 4 screws and slid-
ing roof glass.
2. REMOVE SLIDING ROOF WEATHERSTRIP
3. REMOVE SLIDING ROOF DRIVE GEAR SUB–ASSY
(a) Using a torx wrench (T25), remove the 3 screws and sliding roof drive gear.
4. REMOVE SLIDE ROOF RAIL SUB–ASSY
(a) Disconnect the 4 drain hoses from the housing.
(b) Remove the 6 nuts and 4 bolts, then remove the slide roof rail as shown in the illustration.