BO5229
76–14
–EXTERIOR/INTERIOR TRIM OUT SIDE MOULDING
2717Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(e) Using a heat light, heat the body and moulding.
HINT:
Body: 40 – 60C (104 – 140F)
Moulding: 20 – 30C (68 – 86F)
NOTICE:
Do not heat the body excessively.
(f) Lift the moulding release sheet from the face moulding.
NOTICE:
When the moulding release sheet is removed, take
care that no dirt or no dust can get onto the uncoated
area.
Do not apply excessive force onto the moulding, but
steady pressure with your thumbs.
To Next Page
Loading...
