030EI–01
–SERVICE SPECIFICATIONS POWER STEERING
03–57
168Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
TORQUE SPECIFICATION
Part tightened N⋅m kgf⋅cm ft⋅lbf
POWER STEERING VANE PUMP (2AZ–FE)
Vane pump housing rear x Vane pump housing front 22 224 16
Pressure port union 69 704 51
Power steering suction port union set bolt 12 122 9
Power steering oil pressure switch 21 214 15
Pressure feed tube assy x Vane pump assy 51.5 525 38
Vane pump assy set bolt Bolt A
Bolt B
30 (43)
43
306 (440)
440
22 (32)
32
POWER STEERING VANE PUMP (1MZ–FE)
Vane pump housing rear x Vane pump housing front 24 245 18
Pressure port union 83 846 61
Power steering suction port union set bolt 13 133 10
Pump bracket front x Vane pump bracket rear (TYPE A VANE PUMP)
(TYPE B VANE PUMP)
43
44
438
449
32
32
Vane pump pulley set nut (TYPE A VANE PUMP) 44 449 32
Vane pump assy set bolt 43 438 32
Pressure feed tube assy x Vane pump assy 51.5 525 38
Power steering oil pressure switch 21 214 15
POWER STEERING GEAR
Control valve housing set bolt 21 214 15
Control valve shaft lock nut 24.5 250 18
Rack housing cap 58.5 597 43
Rack guide spring cap nut 48 (68.5) 489 (699) 35 (51)
Power steering rack x Steering rack end sub–assy 58.5 (83.5) 597 (851) 43 (62)
Tie rod assy lock nut 74 755 55
Turn pressure tube union nut 11.5 (12.5) 117 (127) 8 (9)
Rack & pinion power steering gear assy set bolt and nut 70 714 52
Pressure feed and return tubes x Control valve housing 22.5 (24.5) 229 (250) 17 (18)
Pressure feed tube clamp set bolt 9.8 100 86 in.⋅lbf
Return tube assy clamp set nut 9.8 100 86 in.⋅lbf
Front stabilizer bracket 19 194 14
Stabilizer link assy set nut 74 755 55
Tie rod assy set nut 49 500 36
Intermediate shaft sub–assy x Control valve 35.3 360 26
Hub nut 103 1,050 76
( ): For use without SST
To Next Page
Loading...
