Toyota 2002 Camry - Install Crankshaft Pulley

SST
A52486
A62057
SST
A59888
–ENGINE MECHANICAL TIMING GEAR CASE OR TIMING CHAIN CASE OIL
SEAL (2AZ–FE)
14–103
1627Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
11. INSTALL CRANKSHAFT PULLEY
(a) Install the crankshaft pulley (TMC made).
(1) Align the pulley set key with the key groove of the
pulley.
(2) Using SST, install the pulley bolt.
SST 09213–54015 (91651–60855), 09330–00021
Torque: 170 N⋅m (1,733 kgf⋅cm, 125 ft⋅lbf)
(b) Install the crankshaft pulley (TMMK made).
(1) Align the pulley set key with the key groove of the
pulley.
(2) Using SST, install the pulley bolt.
SST 09960–10010 (09962–01000, 09963–01000)
Torque: 170 N⋅m (1,733 kgf⋅cm, 125 ft⋅lbf)
12. INSTALL FAN AND GENERATOR V BELT
(See page 14–5)
SST 09249–63010
13. INSTALL ENGINE MOUNTING BRACKET NO.2 RH
Torque: 52 N⋅m (531 kgf⋅cm, 38 ft⋅lbf)
14. INSTALL ENGINE MOUNTING STAY NO.2 RH
Torque: 64 N⋅m (653 kgf⋅cm, 47 ft⋅lbf)
15. INSTALL ENGINE MOVING CONTROL ROD
W/BRACKET
(a) Install the engine moving control rod w/bracket with 3
bolts.
Torque: 64 N⋅m (653 kgf⋅cm, 47 ft⋅lbf)
16. INSTALL FRONT WHEEL RH
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)
17. INSPECT OIL LEAK