Toyota 2002 Camry - Install Exhaust Valve

SST
Wooden Blocks
A52472
Vinyl Tape
Valve Stem
A13888
14–118
–ENGINE MECHANICAL CYLINDER HEAD ASSY (2AZ–FE)
1642Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
28. INSTALL EXHAUST VALVE
(a) Install the parts below to the cylinder head.
1 Exhaust valve
2 Spring
3 Retainer
(b) Using SST and wooden blocks, compress and install 2
valve spring retainer locks.
SST 09202–70020 (09202–00010)
(c) Using a plastic–faced hammer and the valve stem (not in
use) tip wound with vinyl tape, lightly tap the valve stem
tip to ensure a proper fit.
NOTICE:
Be careful not to damage the valve stem tip.
29. INSTALL VALVE LIFTER
(a) Assemble the valve lifter and the tip of the valve stem with a light coat of engine oil applied.
NOTICE:
Install the valve lifters originally placed.