Toyota 2002 Camry - Install Tight Plug

A62239
14–130
–ENGINE MECHANICAL CYLINDER BLOCK (2AZ–FE)
1654Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
Reference:
Item Mark mm (in.)
Cylinder block main journal bore diameter (A)
0
1
2
3
4
5
6
59.000 – 59.002 (2.08683 – 2.32291)
59.003 – 59.004 (2.08694 – 2.32299)
59.005 – 59.006 (2.08701 – 2.32307)
59.007 – 59.009 (2.08708 – 2.32318)
59.010 – 59.011 (2.08718 – 2.32326)
59.012 – 59.013 (2.08725 – 2.32334)
59.014 – 59.016 (2.08733 – 2.32346)
Crankshaft main journal diameter (B)
0
1
2
3
4
5
54.998 – 55.000 (1.94528 – 2.16535)
54.996 – 54.998 (1.94521 – 2.16527)
54.994 – 54.996 (1.94514 – 2.16519)
54.992 – 54.994 (1.94507 – 2.16511)
54.990 – 54.992 (1.94500 – 2.16504)
54.988 – 54.990 (1.94493 – 2.16496)
Standard bearing center wall thickness
1
2
3
4
1.993 – 1.996 (0.07846 – 0.07858)
1.996 – 1.999 (0.07858 – 0.07870)
1.999 – 2.002 (0.07870 – 0.07882)
2.002 – 2.005 (0.07882 – 0.07894)
27. INSTALL TIGHT PLUG
(a) Apply adhesive around tight plugs.
Adhesive: Part No. 08833–00070, THREE BOND 1324
or equivalent.
(b) Using SST, into the tight plugs as shown in the illustration.
SST 09950–60010 (09951–00200), 09950–70010
(09951–07100)
Standard depth:
Engine front 1.7 – 2.7 mm (0.067 – 0.106 in.)
Engine rear 2.2 – 3.2 mm (0.087 – 0.126 in.)