Toyota 2002 Camry - Generator Assy (1 MZ-FE) Replacement

1902Y–02
A62387
A
C
B
–STARTING & CHARGING GENERATOR ASSY (1MZ–FE)
19–33
1905Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
GENERATOR ASSY (1MZ–FE)
REPLACEMENT
1. REMOVE GENERATOR ASSY
(a) Disconnect the generator connector.
(b) Remove the nut, and disconnect the lead wire from termi-
nal B.
(c) Loosen the bolt A and B.
(d) Loosen the bolt C to lessen the tension of the drive belt.
(e) Remove the bolt A, B and the generator.
2. INSTALL GENERATOR ASSY
(a) Temporarily install the bolt A and B.
(b) Adjust the V–ribbed belt tension by tightening the adjusting bolt C. (See page 14–136)
(c) Tighten the bolt A and B.
Torque:
Bolt A
58 N⋅m (592 kgf⋅cm, 43 ft⋅lbf)
Bolt B 18 N⋅m (184 kgf⋅cm,
13 ft⋅lbf)
(d) Install the lead wire from terminal B.
Torque: 9.8 N⋅m (100 kgf⋅cm,
7 ft⋅lbf)
3. INSPECT DRIVE BELT DEFLECTION AND TENSION(REFERENCE) (Seee page 14–136)