Toyota 2002 Camry - Rear Axle LH Hub Bolt Replacement

30024–02
C83020
SST
C83021
30–34
–DRIVE SHAFT / PROPELLER SHAFT REAR AXLE LH HUB BOLT
1988Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REAR AXLE LH HUB BOLT
REPLACEMENT
HINT:
 COMPONENTS: See page 30–4
 Replace the RH side by the same procedures with the LH side.
1. REMOVE REAR WHEEL
2. REMOVE REAR DISC BRAKE CALIPER ASSY LH(DISC REAR BRAKE TYPE)(See page 30–28)
3. REMOVE REAR DISC(DISC REAR BRAKE TYPE)
4. REMOVE REAR BRAKE DRUM SUB–ASSY(DRUM REAR BRAKE TYPE)
5. REMOVE REAR AXLE LH HUB BOLT
(a) Using SST and a screwdriver or an equivalent to hold, re-
move the rear axle LH hub bolt.
SST 09628–10011
6. INSTALL REAR AXLE LH HUB BOLT
(a) Install a washer and nut to a new rear axle LH hub bolt as
shown in the illustration.
(b) Using a screwdriver to hold, install the rear axle LH hub
bolt by torquing the nut.
7. INSTALL REAR DISC(DISC REAR BRAKE TYPE)
8. INSTALL REAR DISC BRAKE CALIPER ASSY LH(DISC REAR BRAKE TYPE)(See page 30–28)
9. INSTALL REAR BRAKE DRUM SUB–ASSY(DRUM REAR BRAKE TYPE)
10. INSTALL REAR WHEEL
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)