Toyota 2002 Camry - Page 548

F40995
F40994
32–22
–BRAKE BRAKE BOOSTER ASSY
2010Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
18. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS
(a) Install the push rod clevis and lock nut.
19. INSTALL PUSH ROD PIN
(a) Install the push rod pin and clip.
HINT:
Apply the lithium soap base glycol grease to the part indicate by arrow (See page 32–8).
20. INSTALL INSTRUMENT PNL INSERT SUB–ASSY LWR LH
(See page 71–12)
21. INSTALL INSTRUMENT PANEL SUB–ASSY UPPER
(See page 71–12)
22. INSTALL COWL SIDE TRIM SUB–ASSY LH
(See page 71–12)
23. INSTALL FRONT DOOR SCUFF PLATE LH
(See page 71–12)
24. INSTALL VACUUM HOSE ASSY
(a) Install the vacuum hose and vacuum hose bracket to the
body with a bolt.
Torque: 5.4 N⋅m (55 kgf⋅cm, 48 in.⋅lbf)
(b) Connect the vacuum hose to the brake booster with the
clip.
25. CONNECT CHARCOAL CANISTER ASSY(1MZ–FE
ENGINE TYPE)
(a) Install the charcoal canister with the 2 bolts.
Torque: 43 N⋅m (440 kgf⋅cm, 32 in.⋅lbf)
26. INSTALL BRAKE MASTER CYLINDER SUB–ASSY
(See page 32–12)
SST 09023–00100
27. INSTALL AIR CLEANER ASSY
28. FILL RESERVOIR WITH BRAKE FLUID
29. BLEED MASTER CYLINDER(See page 32–4)
SST 09023–00100
30. BLEED BRAKE LINE(See page 32–4)
31. CHECK FLUID LEVEL IN RESERVOIR