Toyota 2002 Camry - Page 764

D26271
MP Grease
D26293
SST
–CLUTCH CLUTCH MASTER CYLINDER ASSY
42–11
2226Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
11. INSTALL CLUTCH MASTER CYLINDER PUSH ROD
CLEVIS W/HOLE PIN
(a) Apply MP grease to the contact surface of the hole pin
and bush.
(b) Connect the clevis to the clutch pedal assy with the hole
pin.
HINT:
Install the hole pin from the left side of the vehicle.
(c) Install the clip to the hole pin.
12. CONNECT CLUTCH MASTER CYLINDER TO
FLEXIBLE HOSE TUBE
(a) Using SST, connect the flexible hose tube.
SST 09023–00100
Torque: 15.2 N⋅m (155 kgf⋅cm, 11 ft⋅lbf)
13. CONNECT CLUTCH RESERVOIR TUBE
(a) Connect the clutch reservoir tube with the clip to the clutch master cylinder assy.
NOTICE:
Connect the clutch reservoir tube so that it will not be twisted.
14. INSTALL BRAKE BOOSTER ASSY
(See page 32–20)
15. INSTALL BRAKE MASTER CYLINDER SUB–ASSY
(See page 32–12)
16. BLEED MASTER CYLINDER
SST 09023–00100
17. BLEED BRAKE LINE(See page 32–4)
18. BLEED CLUTCH PIPE LINE
(a) Fill the brake reservoir tank with clutch fluid and bleed clutch system.
Torque: 8.3 N⋅m (85 kgf⋅cm, 73 in.⋅lbf)
19. CHECK AND ADJUST BRAKE PEDAL HEIGHT(See page 32–6)
20. INSPECT AND ADJUST CLUTCH PEDAL SUB–ASSY
(See page 42–7)
21. CHECK BRAKE FLUID LEAKAGE
22. CHECK CLUTCH FLUID LEAKAGE
23. CHECK FLUID LEVEL IN RESERVOIR