F41590
51–6
–POWER STEERING POWER STEERING SYSTEM
2273Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(j) Disconnect the SST.
SST 09640–10010 (09641–01010, 09641–01020,
09641–01030)
(k) Connect the pressure feed tube to the rack & pinion pow-
er steering gear assy (See page 51–29).
(l) Bleed the power steering system.
5. CHECK STEERING EFFORT
(a) Center the steering wheel assy.
(b) Remove the horn button assy
(See page 50–9, 50–22).
(c) Start the engine and run it at idle.
(d) Using a torque wrench, measure the steering effort in
both directions.
Steering effort (Reference):
6 N·m (60 kgf·cm, 53 in.·lbf) or less
HINT:
Take the tire type, pressure and contact surface into consider-
ation before making your diagnosis.
(e) Install the steering wheel assy set nut.
Torque: 50 N·m (510 kgf·cm, 37 ft·lbf)
(f) Install the horn button assy
(See page 50–9, 50–22).
To Next Page
Loading...
