E57142
E57143
I30371
55–60
–HEATER & AIR CONDITIONER COOLER COMPRESSOR ASSY (2AZ–FE)
2375Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(f) Using a vise pliers, hold the magnet clutch hub and install
the bolt.
Torque: 18 N⋅m (184 kgf⋅cm, 13 ft⋅lbf)
10. INSPECT MAGNETIC CLUTCH CLEARANCE
(a) Set the dial indicator to the magnet clutch hub.
(b) Connect the battery positive lead to the terminal 3 of mag-
net clutch connector and the negative lead to the earth
wire. Turn on and off the magnet clutch and measure the
clearance.
Standard clearance:
0.35 – 0.60 mm (0.014 – 0.024 in.)
If the measured value is out of the standard range, remove the
magnet clutch hub and adjust it with magnet clutch washers.
NOTICE:
Adjustment shall be performed with 3 or less magnet
clutch washers.
(c) Remove the compressor and magnetic clutch from the
vise.
(d) Install the bolt and bracket.
To Next Page
Loading...
