I30086
10 mm
(0.39 in.)
Hexagon
Wrench
Modulator
E50132
E57114
E50386
E50132
I30086
10 mm
(0.39 in.)
Hexagon
Wrench
Modulator
55–66
–HEATER & AIR CONDITIONER COOLER CONDENSER ASSY
2381Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
7. REMOVE COOLER DRYER
(a) Using hexagon wrench 10 mm (0.39 in.), remove the cap
and filter from the modulator.
(b) Remove the 2 O–rings from the cap.
(c) Using a needle nose pliers, remove the cooler dryer.
8. INSTALL COOLER DRYER
(a) Using a needle nose pliers, install the cooler dryer.
(b) Install 2 new O–rings to the cap.
(c) Sufficiently apply compressor oil to the fit surfaces of the
O–ring and the cap.
Compressor oil: ND–OIL 8 or equivalent
(d) Using hexagon wrench 10 mm (0.39 in.), install the cap
to the cooler condenser assy.
Torque: 12 N⋅m (125 kgf⋅cm, 9 ft⋅lbf)
To Next Page
Loading...
