6007G–01
H40004
SST
H40005
SST
Battery
H40004
SST
–SUPPLEMENTAL RESTRAINT SYSTEM HORN BUTTON ASSY
60–17
2400Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
DISPOSAL
HINT:
When scrapping vehicle equipped with an SRS or disposing of a horn button assy, always first deploy the
airbag in accordance with the procedure described below. If any abnormality occurs with the airbag deploy-
ment, contact the SERVICE DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
Never dispose of a horn button assy which has an un-
deployed airbag.
The airbag produces a sizeable exploding sound
when it deploys, so perform the operation out–of–
doors and where it will not create a nuisance to
nearby residents.
When deploying the airbag, always use the specified
SST (SRS Airbag Deployment Tool). Perform the op-
eration in a place away from electrical noise.
When deploying an airbag, perform the operation at
least 10 m (33 ft) away from the horn button assy.
The horn button assy is very hot when the airbag is
deployed, so leave it alone for at least 30 minutes af-
ter deployment.
Use gloves and safety glasses when handling a horn
button assy with the deployed airbag.
Always wash your hands with water after completing
the operation.
Do not apply water, etc. to a horn button assy with the
deployed airbag.
1. DISPOSE HORN BUTTON ASSY(WHEN SCRAPPING
VEHICLE DEPLOYMENT METHOD)
HINT:
Have a battery ready as the power source to deploy the airbag.
(a) Check functioning of the SST.
CAUTION:
When deploying the airbag, always use the specified SST:
SRS Airbag Deployment Tool.
SST 09082–00700
To Next Page
Loading...
