’03Camry_U (L/O 0301)
281
2003 CAMRY from Jan. ’03 Prod. (OM33593U)
Low beam (outside)
High beam (inside)
1. Open the hood. Turn the bulb base
counterclockwise to the front of the
vehicle as shown.
The above illustration indicates left−hand
headlight.
2. Unplug the connector while depress-
ing the lock release.
If the connector is tight, wiggle it.
3. Plug in a new bulb into the connec-
tor and install it into the mounting
hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
—Headlights
To Next Page
Loading...
