Toyota 2004 4Runner - Page 57

WWW.MANUALS.WS
WWW.MANUALS.WS
’04 4Runner_U (L/O 0409)
57
2004 4RUNNER from Sep. ’04 Prod. (OM35847U)
REINSTALLING THIRD SEATS
1. Remove the seat anchor covers from
the floor and install them in the
back of the seat cushion. Hold the
seat and engage the seat striker to
the seat lock, then place the seat on
the floor. Press down the seatback
to securely lock the seat to the
body.
2. Pull out the seat leg from the back
of the seat cushion and lock it on
the anchor. Reinstall the cover.
3. Raise the seatback while pushing
down the seatback angle adjusting
lever.
CAUTION
When removing or reinstalling the
seat, observe the following to prevent
personal injury:
 Do not fold or remove the seat
while the vehicle is moving.
 Be careful not to get your hands or
feet pinched in the seat.
 Be careful not to hit the removed
seat against a person or drop it on
yourself.