EasyManua.ls Logo

Toyota 2004 Matrix - Page 139

Toyota 2004 Matrix
309 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
04 MATRIX_U (L/O 0307)
131
2004 MATRIX from Oct. ’03 Prod. (OM12861U)
If you try to push the disc back into the
receiver before 25second time period is
complete, the receiver will try to eject the
disc again when the 25second time peri-
od is complete.
Do not repeatedly push the eject button to
eject a disc after you have tried to push
it in manually. The receiver 25second
eject timer will reset at each push of
eject, which will cause the receiver not to
eject the disc until the 25second time
period has elapsed.
Once the player stops and the disc is
ejected, remove the disc. After removing
the disc, push the PWR/VOL” knob off
and then on again. This will clear the
discsensing feature and enable discs to
be loaded into the player again.
While the ignition is in LOCK”, you can
eject one or all discs but you cannot rein-
sert them.
<< REV FDW >> (Reverse/Fastforward
button)
If you want to fastforward or reverse a
compact disc track, push and hold the
“>> (fastforward) or <<” (reverse) but-
ton. When you release the button, the
compact disc player will resume playing.
The display will show elapsed time.
AM/FM
Push the “AM/FM button to switch be-
tween the AM and FM band. AM”, “FM1”
or “FM2” will appear on the display.
Also, push this button to switch from the
compact disc operation to the radio.
Alternate Frequency function
To turn the AF mode on, push and hold
the “AM/FM button until you hear a beep.
“AF ON” will appear on the display.
When reception condition worsen, the au-
dio system will select the RDS station
which has the same PI (Program Identifi-
cation) code.
To turn off the AF mode off, push and
hold the “AM/FM” button again until you
hear a beep. AF OFF” will appear on the
display.
AUDIO (Manual tone and sound balance
adjustment function)
Manual tone adjustment function
This knob is used to adjust the tone
manually.
Manual tone operations are saved into the
custom setting of the equalization. (See
“AUTO EQ”.)
For lowpitch tone adjustment, push the
“AUDIO knob repeatedly until “BASS”
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from
“BASS 6” to “BASS +6”.
For middlepitch tone adjustment, push
the AUDIO” knob repeatedly until “MID”
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from “MID
6” to “MID +6”.
For highpitch tone adjustment, push the
“AUDIO knob repeatedly until “TREB”
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from
“TREB 6” to “TREB +6”.

Table of Contents

Related product manuals