’04 MATRIX_U (L/O 0307)
281
2004 MATRIX from Oct. ’03 Prod. (OM12861U)
1. Open the hood. Turn the bulb base
counterclockwise to the front of the
vehicle as shown.
2. Unplug the connector.
If the connector is tight, wiggle it.
3. Install a new bulb and connector
into the mounting hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
—Headlights (low beam)
To Next Page
Loading...
