EasyManua.ls Logo

Toyota 2004 Sequoia - Page 111

Toyota 2004 Sequoia
419 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
04_SEQUOIA_U (L/O 0309)
103
2004 SEQUOIA from Sep. ’03 Prod. (OM34423U)
Covers
Cap
Canada only
Type A
Covers
Cap
Canada only
Type B
For owners in Canada
The symbol on a child restraint system
indicates the presence of a lower connec-
tor system.
CHILD RESTRAINT SYSTEM
INSTALLATION
Type A —
1. Turn up the covers for left lower
anchorage on the center position of
the seats and for anchorages on the
left side position of the seats, and
remove the cap for the right lower
anchorage of the center position of
the seat as shown in the illustration.
2. Widen the clearance between the
seat cushion and seatback a little
and confirm the position of the low-
er anchorages below the tag and cap
in the seat cushion.
3. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.

Table of Contents

Related product manuals