04_SEQUOIA_U (L/O 0309)
23
2004 SEQUOIA from Sep. ’03 Prod. (OM34423U)
2. Remove the discharged transmitter bat-
tery by ballpoint pen. Insert the tip of
ballpoint pen at the guide groove and
lift as shown in the above illustration.
NOTICE
Do not bend the terminals.
3. Put a new transmitter battery with posi-
tive (+) side up.
Close the transmitter case securely.
NOTICE
! Make sure the positive side and
negative side of the transmitter bat-
tery are faced correctly.
! Do not replace the battery with wet
hands. Water may cause unexpected
rust.
! Do not touch or move any compo-
nents inside of the transmitter, or
it may interfere with proper opera-
tion.
! Be careful not to bend the electrode
of the transmitter battery insertion
and that dust or oils do not adhere
to the transmitter case.
! Close the transmitter case securely.
After replacing the battery, check that the
transmitter operates properly. If the trans-
mitter still does not operate properly, con-
tact your Toyota dealer.
To Next Page
Loading...
