EasyManua.ls Logo

Toyota 2004 Sequoia - Page 75

Toyota 2004 Sequoia
419 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
04_SEQUOIA_U (L/O 0309)
67
2004 SEQUOIA from Sep. ’03 Prod. (OM34423U)
2. Pinch the two edges of the shoulder
seat belt for the third seat center
position with your fingers and slide
the belt past the slot of the guide as
shown above. At this time, the elas-
tic cord must be behind the seat
belt.
CAUTION
Make sure the belt is not twisted and
that it lies flat. The elastic cord must
be behind the belt and the guide
must be on the front.
3. Buckle, position and release the seat
belt. (For wearing the seat belt, see
“—Fastening front and rear seat
belts” on page 60 in this Section.)
Make sure the shoulder belt crosses
the shoulder.
REMOVING AND STORING THE
COMFORT GUIDE
Pinch the two edges of the seat belt
together so that you can slide them out
of the guide. Pull the guide upward and
slide the guide with the elastic cord
into the pocket on the rear of the seat-
back of the third left seat as shown
above.

Table of Contents

Related product manuals