1. INSTALL NO. 1 CLUTCH HUB INTO NO. 1 HUB SLEEVE
a. Install the 3 springs and shifting keys to the clutch hub.
b. Install the hub sleeve to the clutch hub.
Fig. 99: Installing No. 1 Clutch Hub Into No. 1 Hub Sleeve
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. INSTALL 1ST GEAR BEARING INNER RACE
Using SST and a press, install the 1st gear bearing inner race.
SST 09506-35010
HINT:
Ali
n the hole of the output shaft and inner race.
NOTE: Assemble the clutch hub and hub sleeve in the direction shown in
the illustration.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:24 AM Page 107 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
