Fig. 100: Installing 1st Gear Bearing Inner Race
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSTALL NEEDLE ROLLER BEARING, 1ST GEAR, SYNCHRONIZER RINGS AND NO. 1
HUB SLEEVE TO OUTPUT SHAFT
a. Apply MP grease to the needle roller bearing and install it.
b. Place the synchronizer rings on the 1st gear.
c. Install the 1st
ear.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:24 AM Page 108 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
