16. DISCONNECT 2 STABILIZER BAR LINKS
Remove the 2 nuts and disconnect the LH and RH stabilizer bar links.
Torque: 44 N.m (450 kgf.cm, 32 ft.lbf)
Fig. 11: Disconnecting LH & RH Stabilizer Bar Links
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
17. REMOVE FRONT SUSPENSION CROSSMEMBER ASSEMBLY WITH STABILIZER BAR
a. Support the front suspension crossmember with a jack.
b. Remove the 2 set bolts of the PS gear assembly.
Torque: 137 N.m (1,397 kgf.cm, 101 ft.lbf)
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:22 AM Page 12 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
