Toyota 2005 RAV4 - Page 38

Fig. 33: Measuring Radial Clearance
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
19. REMOVE NO. 3 CLUTCH HUB AND 5TH GEAR
a. Using 2 screwdrivers and a hammer, tap out the snap ring.
HINT:
At the time of the reassembly, refer to the following item.
Select a snap ring that allows the minimum axial play.
THICKNESS SPECIFICATION CHART
Mark Thickness mm (in.) Mark Thickness mm (in.)
a 1.75 (0.0689) f 2.00 (0.0787)
b 1.80 (0.0709) g 2.05 (0.0807)
c 1.85 (0.0729) h 2.10 (0.0827)
d 1.90 (0.0748) j 2.15 (0.0847)
e 1.95 (0.0768) - -
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 38 © 2005 Mitchell Repair Information Company, LLC.