Toyota 2005 RAV4 - Page 47

Fig. 42: Removing Output Shaft Rear Bearing Outer Race
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
28. REMOVE REVERSE SHIFT ARM BRACKET ASSEMBLY
Remove the 2 bolts and pull off the reverse shift arm and bracket.
Torque: 17 N.m (175 kgf.cm, 13 ft.lbf)
29. REMOVE REVERSE IDLER GEAR AND SHAFT
Pull out the shaft, remove the reverse idler
g
ear and thrust washer.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 47 © 2005 Mitchell Repair Information Company, LLC.