Toyota 2005 RAV4 - Page 55

Torque: 25 N.m (250 k
g
f.cm, 18 ft.lbf)
42. REMOVE NO. 5 SYNCHRONIZER RING WITH KEY SPRING FROM NO. 3 CLUTCH HUB
a. Remove the No. 5 synchronizer ring with the key spring from the No. 3 clutch hub.
b. Using a screwdriver, remove the snap ring.
HINT:
Wrap vinyl tape on the screwdriver to prevent damaging the synchronizer ring.
c. Remove the synchronizer rings.
Fig. 50: Removing Snap Ring From Synchronizer
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION
1. INSPECT NO. 5 SYNCHRONIZER RING
a. Check for wear or dama
g
e.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 55 © 2005 Mitchell Repair Information Company, LLC.