Toyota 2005 RAV4 - Page 61

Fig. 56: Installing New Bearing
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
g. Install the transaxle case receiver.
h. Install and torque the 3 bolts.
Torque: 7.0 N.m (71 kgf.cm, 62 in.lbf)
2. REPLACE OUTPUT SHAFT FRONT BEARING OUTER RACE AND OUTPUT SHAFT FRONT
COVER
a. Using SST, pull out the output shaft front bearing outer race.
SST 09308-00010
b
. Remove the output shaft cover.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 61 © 2005 Mitchell Repair Information Company, LLC.