Fig. 59: Using SST & A Hammer To Drive In A New Output Shaft Front Bearing Outer Race
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. REPLACE REVERSE RESTRICT PIN
a. Using a hexagon wrench (6 mm), remove the screw plug.
b. Using a pin punch (5 mm) and hammer, drive out the slotted spring pin.
c. Replace the reverse restrict pin.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 64 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
