Fig. 71: Removing Rear Bearing & 4th Gear
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5. REMOVE 2 NEEDLE ROLLER BEARINGS, SPACER AND SYNCHRONIZER RING
6. REMOVE SNAP RING
Using 2 screwdrivers and a hammer, tap out the snap ring.
7. REMOVE NO. 2 HUB SLEEVE ASSEMBLY, SYNCHRONIZER RING AND 3RD GEAR
Using a press, remove the No. 2 hub sleeve assembly, synchronizer ring and 3rd gear.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 78 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
