Fig. 86: Measuring 1st & 2nd Gears Thrust Clearance
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. CHECK 1ST AND 2ND GEARS RADIAL CLEARANCE
Using a dial indicator, measure the radial clearance between the gear and shaft.
Maximum clearance:
1st and 2nd gears: 0.053 mm (0.0021 in.)
If the clearance exceeds the maximum, replace the
ear, needle roller bearin
or shaft.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 93 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
