254
2006 TACOMA from Jan.’06 Prod. (OM35871U)
LS10011
Remove spacers from the center panel.
Place one spacer on the pin that would be
below transmitter button when the cover is
closed. Close the cover.
LS10012
When the garage door opener transmitter
is properly installed, you can operate the
transmitter by pushing the center panel of
the cover.
LS10013
If the center panel does not contact your
garage door opener transmitter:
Check to see if spacer is on the cor-
rect pin.
Attach another spacer to the top of
original spacer. Check operation. If re-
quired, continue to add spacers until
contact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
06 04.25
carownersmanual.net
carownersmanual.net
To Next Page
Loading...
Need help?
General
